Universal Audio LUNA 1.0.8アップデート来た!

結構良いペースでのアップデートですね。

スポンサーリンク

今回のアップデートの内容


Version 1.0.8(August 5, 2020)の内容は次のとおりです。

New

  1. Direct Output Delay Compensation
    • All SEND and OUTPUT routings to Apollo LINE and MON outputs are now aligned.
  2. Discard Recording Shortcut
    • Punch out of record and move the recorded wav file to the trash: Shift + Command + “.”
  3. Tape Assign Hover Functions
    • Direct navigation to global assignment and control panels
    • Easier access to secondary track controls and functions.

ダイレクトアウトの遅延補正、これは使っていないのでよくわかりませんが、出力先によって遅延が違ったということだったようですね。

レコーディング破棄のショートカットも追加されました。Shift+Command+.でレコーディング中のオーディオを破棄(レコーディング中止みたいな感じです)するショートカットです。

スタジオなどではとりあえず全部残しておくという考えですが、僕の場合は自分でプレイしていると残す必要のないものが明確です。テイクが増えると煩雑になるのでこのショートカットはありがたいですね。

3番めはちょっとよくわからないのでもう少し触ってみたいと思います。

Improved

  • Timeline drawing and track resizing use less GPU resources.

改良ポイントは、トラックのリサイズやタイムラインの描画時のGPUのリソースが減ったようです。GPUを内蔵していないマシンにも優しい改良です。

Fixed

  • Resolved track mixdown delay compensation for tracks feeding buses with latency that are not in the mixdown
  • Resolved an issue which could cause artifacts when recording from Apollo Virtual inputs or with ARM disabled
  • Resolved a brief hang that could occur when dragging or trimming clips
  • Resolved an offline mixdown issue that could delay audio from instrument tracks with MIDI data at the exact start of the session
  • MIDI note playback is no longer cut short on first loop after recording
  • User-generated AU plug-in icons are no longer removed when installing UAD software
  • Navigate To Next/Previous Bar commands now scroll timeline view
  • CUE BUS assignments are reflected immediately in CUE OUTPUTS window
  • Resolved issue when pasting volume automation from multiple tracks
  • Resolved “Unable to Set Preset” issue that could occur while searching INSERT focus browser
  • Values typed into track volume popover are applied correctly to all tracks when selection grouping is enabled
  • Trim Clip To Selection command no longer changes selection when there are multiple track versions
  • Resolved issue with focus channel Tape Saturation adjustment when using selection grouping
  • Pressing apply works on the first attempt when changing time signatures at bar 1
  • Resolved MIDI note recording issues while loop recording data from channels 2-16
  • POWER modifier correctly toggles Neve Summing bypass
  • OUTPUT routing assignment no longer disappears from focus channel after collapsing and expanding the mixer row

結構な数のバグフィックスです。正直、全く気づかなかった項目ばかりで変化を実感しにくいですが、タイミング補正関係に力を入れていたようです。

2,000を超えるユーザーからのフィードバック

2,000を超えるユーザーからのフィードバックを元に機能追加やバクフィックスを行っているようです。

前回のアップデートから1ヶ月も経たないスケジュールで1.0.8が来ました。結構頑張ってくれているみたいで嬉しいですね。

これからに期待です!それでは!

À bientôt.

スポンサーリンク
スポンサーリンク
最新情報をチェックしよう!